Outdoor sign purchasing

Ordering outdoor LED signs: what do IP65 and IP67 cover?

Before ordering an outdoor illuminated sign, check which enclosure or component an IP code covers and agree the complete product and installation scope.

By AOCHUANGSIGN4 min read
Outdoor sign purchasing product reference
Product reference. Final construction and project scope require review.

Before ordering an outdoor LED sign, ask what product or component an IP code actually covers. IP65 and IP67 describe different ingress-protection categories; neither label by itself defines the complete sign, its electrical installation, corrosion resistance or expected service life. A component marked IP67 does not automatically make the finished lettering, cabinet and connections IP67.

What is the difference between IP65 and IP67?

IEC uses IP codes to describe ingress protection. The first characteristic numeral concerns solid-particle ingress and access protection; the second concerns water ingress. In the examples here, the first numeral is 6, indicating a dust-tight category. The water categories differ: 5 concerns water jets, while 7 concerns temporary immersion under specified test conditions.

Use that distinction to ask about the actual evidence. Do not translate either code into the unrestricted statement waterproof in every condition. A published category is meaningful only with the identified product, configuration and relevant test or manufacturer information. For a project exposed to both jets and immersion, request confirmation of the applicable protection rather than assuming one test establishes every other condition.

What is the difference between IP65 and IP67?
Wording in an offerWhat it tells the buyerWhat still needs confirmation
IP65 componentThe named component has the stated ingress categoryWhich part and configuration are covered?
IP67 componentTemporary-immersion category is stated for that componentDoes the evidence address the project's actual exposure?
Outdoor useAn intended use is describedWhich construction and supporting evidence apply?
Waterproof signA broad marketing descriptionWhat precise, verifiable protection is being offered?
Complete sign assessmentThe proposed assembly is identifiedWhich documents and installation conditions belong to it?

Why must the complete sign scope be checked?

An illuminated sign can include letter bodies or a cabinet, faces, LED modules, power supplies, cable entries and connecting components. These do not become one assessed assembly merely because a single item has a published IP marking. Ask the supplier to identify the scope of each document and explain which details remain for the responsible project team to review.

This is a purchasing question, not a wiring or sealing instruction. Electrical design, installation and any required local acceptance should be reviewed by the responsible qualified parties. Give them the actual component proposal and site information before approving the order, rather than asking them to work from a product photograph after delivery.

What site information should go in the enquiry?

Describe whether the sign is sheltered or directly exposed to rain, its position on the building and the planned cleaning method. Identify salt exposure, unusual contaminants and expected access for maintenance. An under-canopy location and an exposed projecting sign should not be treated as the same installation just because both are outdoors.

Include wide and close-up photographs with the sign area marked. Note where supporting components are expected to be located and ask the project team to confirm that arrangement. For a lettering project, compare the front-lit and halo-lit options; for a cabinet, use the lightbox quotation checklist.

What should a power-supply proposal identify?

Request the proposed model, suitable electrical characteristics, intended operating environment and location, and any required supporting documentation. MEAN WELL's selection guidance considers system requirements, driving method, operating environment and mechanical type. Those are reasons to request a matched proposal, not to select a power supply from wattage alone or copy one universal margin from another project.

Ask who includes the power components, which controls are proposed and which responsibilities remain with the local installer. If a named brand or model is a requirement, put it in the quotation scope and confirm what will actually be supplied. A reference to a manufacturer's guidance is not a statement that every AOCHUANGSIGN sign uses that manufacturer's products.

What should be agreed before placing the order?

  • The drawings identify the actual sign construction and configuration.
  • Any stated IP information names the item and evidence it covers.
  • Site exposure and cleaning conditions have been described.
  • The relevant components and documents are identified in the proposal.
  • Building interfaces, electrical work and local review have clear responsibilities.
  • Quality assurance scope and after-sales arrangements are written into the order.

Review our outdoor commercial signage for the product type you need. Send a quotation request with your artwork, quantities, destination and site information. The goal is a specific, reviewable proposal for your location rather than a larger IP number without a defined scope.

References & further reading

External manufacturer or carrier guidance supports the terminology and general considerations discussed here. Their product specifications and policies are specific to their own services.

Prepared as a purchasing discussion aid. Confirm the specification, installation responsibilities and applicable requirements for your project.

Continue reading

All articles

YOUR NEXT PROJECT

Let's work through the details.

Share your artwork, quantities and delivery destination.

Prepare your enquiry